Компания «АМТТ» предлагает алюминиевый лист, алюминиевую ленту а также алюминиевую

Aluminum sheet is divided by make and ways of cutting. AMC, AMG, AD, 1105, 1561 – more popular brands of sheets. Aluminum alloys are double, triple and more complex systems with different solubility of the components in the solid state.
AD alloys - a technical purity aluminum containing up to 0,7% of impurities, chief among them - Fe and Si.
Impurities Fe and Si., As well as some other metals, some increase the strength characteristics, but significantly lower rates of ductility and electrical conductivity of the alloy. 

Alloy AMc - is the only alloys so-called binary system A1 - Mn. It has high corrosion resistance, virtually no different from the corrosion resistance of alloy AD1. Alloy AMC used in areas where high corrosion resistance is gentle:
- Food industry
- Construction (indoor / outdoor)
- To manufacture basic parts

Alloy АМG2, AMG3 - refer to the system A1 - Mg - Mn-Si. It has high corrosion resistance, good spot welds, roller, and gas welding. Alloy  well deformed in cold and hot conditions. Interval hot deformation is within the range 340-43 ° C, cooling after hot deformation on the air.  Alloy АМG2, AMG3 apply:
- Construction (suspended ceiling, exterior wall panels)
- Manufacture of pipes
- Aerospace
- End-plating equipment
- Automotive industry (manufacturing bodies, tanks, plating buses and vans) 
 
Alloy AMg6-AMg5 - refer to the system A1 - Mg - Mn. It has a high plastic characteristic, both at room and at elevated temperatures, and has high corrosion resistance in various environments, including seawater. This, as well as good weld ability of the alloy determines its wide application in shipbuilding.
Alloy AMg6-AMg5 apply:
- Shipbuilding
- Trains
- Automotive
Alloy AMg6 widely used for the production of rocket fuel tanks.

Alloy D16 - the most common alloy. He is intensely heat-hardened. Alloy well deformed in the hot and cold. Deformation at room temperature, the alloy may be in the annealed and in quenched state. Mechanical properties of semi-finished products after quenching and natural aging are largely dependent on the conditions of pretreatment. Alloy D16 apply:
- In the power structures of aircraft D1, D16 (Duran)
- Aircraft